Introduction to the complete production process of rubberwood pellets with an hourly output of 9 to 12 tons in Indonesia.The entire production line equipment was provided by Shandong Yulong Machinery Co., Ltd.
The customer’s raw material is rubberwood with a moisture content of approximately 40%.
The customer’s raw materials are initially crushed into wood chips of about two centimeters using the Yulong Baofenglong wood chipper.Wood chips are conveyed by belt conveyors to two single-shaft high-efficiency hammer mill for fine grinding.
The crushed sawdust is conveyed by a belt conveyor to the drying section for further drying.The drying section is equipped with A 3m x 24m drum rotary dryer to dry the wood sawdust.The dried wood chips are then filtered by a cyclone dust collector before falling onto a belt conveyor.
The belt conveyor transports the dried wood sawdust to the dry material warehouse for storage.The double-shaft uniform material silo evenly conveys the material to three horizontal screw conveyors .The material is fed evenly into three Yulong 850 pellet mills for pelletizing.Total production of 9-12 tons per hour.
The finished pellets are conveyed by a large-angle belt conveyor to the Yulong counter-flow cooler for cooling.Impurities are then removed by a vibrating screen.
The finished pellets are conveyed to a ton bag packaging machine via a second large-angle belt conveyor.The above is a complete process introduction for the entire production line.
If you would like to know a complete large-scale dense forming production line, Shandong Yulong welcomes you to visit our factory for on-site inspection.




